Waterproof leather:

Treated with mineral oil or fluorinated resin to prevent water from entering, this treatment can improve the mechanical properties of leather to make it more wear-resistant, and increase the comfort (softness) and extension dexterity (touchability) of gloves Can extend the service life.

The characteristics of waterproof gloves: better dexterity, can be kept soft after being used in a wet place, longer service life, comfortable and accurate in use.

Oiled waterproof leather: Treated with synthetic mineral oil or fluorinated resin to prevent water and oil from entering. This treatment can improve the mechanical properties of the leather, make it more wear-resistant, and increase the comfort (softness) and extended dexterity (touch) of the gloves, and can extend the life.

The characteristics of waterproof leather gloves: better dexterity, can be kept soft after using in oily and wet places, longer service life, and accurate movement.

Heat-resistant leather: After treatment, the leather becomes more heat-resistant and reduces shrinkage when it comes into contact with flames. This treatment brings the leather into contact with a heat source for easy identification and dyes the leather yellow. This treatment can also be applied to the scalp skin.

Polyurethane coated two-layer skin:

The PU coating on the two-layer leather can prevent water and oil from entering and improve the mechanical properties of the leather.

Vibration-absorbing materials:

Before choosing anti-vibration materials, you must know the following information:

Frequency of vibration

Whether it is intermittent or continuous vibration, continuous vibration generated by reciprocating tools and rotary tools or continuous vibration generated by air pressure tools.

Leather or textile appearance:

The cushion structure makes the skin of the hand feel comfortable. The GELFOM vibration damping layer consists of two layers of rubber foam to protect the GELFOM vibration damping layer. This is an ideal structure for weakening and absorbing vibration.

Insulating gloves commonly used are 12 kV rubber insulating gloves and 35 kV rubber insulating gloves.

12KV rubber insulated gloves performance:

Rubber insulated gloves with a factory test voltage of 12000V. Mainly used as auxiliary safety equipment on high-voltage power equipment above 1000V. As a basic safety appliance on low-voltage electrical equipment below 1000V.

Precautions:

1. The sleeves of the clothes should be put into the mouth during the operation to prevent accidents.

2. After use, the internal and external dirt should be scrubbed clean. After drying, sprinkle with talcum powder and place it flat to prevent damage. Do not place it on the ground.

3. During transportation and storage, it should not be in contact with oleic acid or alkali or other corrosive substances, and should be stored in dry and ventilated-15 degrees to 30 degrees, relative humidity 50 to 80% away from the heat source 1M away from the heat source.

4. A retest of withstand voltage performance must be performed every 6 months