The hand is not only a direct tool for labor production, but also the first tool for labor production. Therefore, choosing the right gloves is very important for safety and preventing cuts. At the work site, most operations are performed by hand, and the safety and anti-cutting of the opponent mainly rely on gloves. remember! When using cut-resistant gloves, it is necessary to analyze the workpiece, equipment and operating conditions, and then choose gloves that are made of suitable materials and are easy to operate to protect them.

The common types of cutting protective gloves are as follows:

Labor protective gloves have the function of protecting hands and arms. Operators usually use such gloves when working. For insulated gloves used for live work, please select appropriate gloves according to the voltage and check the surface for cracks, stickiness, embrittlement and other defects. If it is abnormal, it is forbidden to use; acid and alkali resistant gloves are mainly used for gloves that contact acid and alkali; rubber oil resistant gloves are mainly used for gloves that come into contact with mineral oil, vegetable oil and aliphatic solvent; The rigidity, thickness, holes, etc. of the leather or canvas surface should be checked. If it is defective, it is not allowed to be used. The gloves must be long enough and the wrists must not be exposed.

For operations that require fine-tuning, it is inconvenient to wear cut-resistant gloves; in addition, for operators who use drilling machines, milling machines and conveyors, and places where there is a danger of crushing, if gloves are used, they will be caught or pinched .

1. Wear gloves when using the grinder. But always hold the grinder handle with both hands!

2. Do not wear gloves when grinding materials with a lathe. The lathe will pull the gloves into the winding!

3. Do not wear gloves when operating the drilling machine. The gloves will get stuck in the rotating chuck!

4. Do not wear gloves when grinding metal on a bench grinder. Even tight gloves have the risk of being caught by the machine.